Elite: Dangerous Blog

New in 1.2 Shield Boosters are a bit of a mystery to me at least, or were until today anyway.

They increase your shields (says so on the tin) but what does that actually mean?

Well, your shield strength is rated in Mega Jules (MJ) so, for instance if you are in a Cobra with a class 3E Shield Generator the shield is rated 61.6MJ and the best shields are a 4A, rated 125.5MJ.

You can see a full table of shield ratings here on Reddit.

What the shield booster does is multiply that figure by its “multiplier” value. If you bought a 0E Shield Booster which has a multiplier of 1.04, then your shields maximum strength would go from 125.5MJ to 130.52MJ.

What's more is they stack; if you buy more than one (two are possible in a Cobra) the multiplier values are all added. The way it does this is to calculate the increase percentage and adds that – an A rated shield booster is plus 20% (1.2) so two is plus 40%. The Cobra’s shields with two 0A Shield Boosters got from 125.5MJ to 175.7MJ!

What’s the catch? The first is power consumption. The Shield Boosters suck power like Frankenstein’s monster! The 0A Shield Booster draws 1.2MW. The second catch is recharge time. If you lose shields, the time they need to recover is much longer. How long? I haven’t been able to get a solid number yet.

Another factor for considering shield booster is cost and weight. Top end shields are expensive and heavy.

CMDR jgm on the Frontier forums has noted

I could take a 5D shield and add two 0C boosters and end up with a better shield than a straight 5A at a fraction of the cost, with lower mass and power usage.

This gets you better shields at 4% of the cost and a little over half the weight!

My 5A Fer-De-Lance shield generator has four 0B Shield Boosters, taking the shields from 478.8MJ to an eye-watering 779.16MJ!